Skip to content
Thorntek Electrical, Level 2 ASP
EC 283038C + Level 2 ASP 4869 + Ausgrid & Endeavour accredited

Free + No obligation + Sydney wide

Switchboard audit. One photo.

Open the meter box door and photograph the inside: the front of the panel. Send it through with your details and we come back with an accurate fixed quote for anything the board needs.

Prefer email? Send your photo and suburb to connect@thorntek.com.au. Just open the door. Never take the internal panel off.

Desktop assessment + Free site visit if needed + Fixed quote

Step 1 of 5

Your meter box photo

Open the meter box door and take one clear, well lit photo of the inside: the front of the panel. Don't open the internal panel. The door is all we need.

Your meter box photo preview
Step 2 of 5

Where's the property?

Helps us check which network you're on and book a site visit if you go ahead.

Got a photo of where your service cable attaches to the house? Optional. Helps confirm the supply.

Point of attachment photo preview
Step 3 of 5

What's your supply?

Not sure? That's fine. Pick "Not sure" and we'll confirm it for you.

Step 4 of 5

What's on the board?

Tick what's already installed, and what you're planning. Helps us factor future load into the quote.

Item
Have
Planning
Step 5 of 5

How do we reach you?

Last step. Your audit hits our inbox the moment you submit.

From photo to fixed quote

01

We complete a desktop assessment of the board from your photos and property details.

02

If anything needs confirming on the ground, we complete a free site visit.

03

You get an accurate fixed quote for the works, not an estimate that creeps.

Most boards can be quoted straight from the photos. If yours can't, the site visit costs you nothing.

The photo we need

  • Open the meter box door.
  • Photograph the inside: the front of the panel, well lit.
  • Leave the internal panel in place. Live parts sit behind it, and the door shot tells us what we need.

Already know the board needs replacing? Go straight to switchboard upgrades. Been handed a notice from Ausgrid or Endeavour? Start at defect notice rectification instead. For those we need the notice, not the board.

Thorntek electrician working at an open residential meter box

Common questions

Is the audit really free?

Yes. The photo assessment is free and so is the site visit if one is needed. You only pay if you accept the quote and we do the work. Send the photo through and see what comes back.

What photo do you need?

Open the meter box door and take one clear, well lit photo of the inside: the front of the panel. Leave the internal panel in place; the door is all you need to open. If you can, add a photo of where the service cable attaches to the house.

How accurate is the quote?

Once we receive your photos and property details we complete a desktop assessment of the work required, and if a site visit is needed to assess it accurately we complete one, free. Then you get an accurate fixed quote, not an estimate that rises later.

Can I email the photo instead?

Yes. Email your photo with your suburb and contact details to connect@thorntek.com.au, or use the contact page. The form there takes photo uploads too.

Who looks at my photo?

Licensed electricians at Thorntek: NSW Electrical Contractor Licence EC 283038C, Level 2 ASP 4869, accredited to both Ausgrid and Endeavour Energy, on the tools since 2013. Send it through and it lands straight in our inbox.

One photo. Sorted.

Send it through and we'll take it from there.

Call us Get a quote